Kyocera ECOSYS FS-9520DN - Manual (Page 61)

Chapter 3 Using the Operator Panel
3-40
Press the or key repeatedly until Memory Card
> appears.
Press the key.
Press the or key repeatedly until >Format ap-
pears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key. Processing appears and for-
matting of the memory card starts.
When the formatting is successfully completed, the
printer automatically prints out a format information
page.
Figure 3-18
The format information page includes the following
items;
Capacity: The total size of the memory card.
Used Space: The space the printer uses for its
system.
Free Space: The space remaining in the memory
card for storing data.
When the memory card format information is
printed, the message display returns to Ready.
Printing a List of Data Names
The printer prints a list of all data names (referred to as par-
titions) stored in a memory card for reference. (Printing a list
is also available for a font card.) To print a list of data names
for the memory card, proceed as follows.
Press the MENU key.
Press the or key repeatedly until Memory Card
> appears.
Press the key.
Press the or key repeatedly until >List of
Partitions appears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key. Processing appears and the
printing of the list starts.
Figure 3-19
The printout (example above) includes the following
information.
Device Name/Number: CARD/A is indicated for the
memory card.
Capacity: The total capacity of the memory
card in bytes.
Used Space: The total size of the data stored in
the memory card in bytes.
Free Space: The size of the capacity remaining
in the memory card for storing
further data, including the amount
of memory that the printer uses for
its system.
Memory Card >
>Format
>Format ?
2
3
4
5
6
FORMAT INFORMATION
Memory Card >
>List of
Partitions
>List of
Partitions ?
1
2
3
4
5
6
Partition Information
Device Information
PARTITION LIST