Kyocera ECOSYS FS-9520DN User Manual
Page 2
i
Please read the Operation Guide before using the printer.
Keep it close to the printer for easy reference.
The sections of this guide and parts of the printer marked
with symbols are safety warnings meant to protect the user,
other individuals and surrounding objects, and ensure correct
and safe usage of the printer. The symbols and their mean-
ings are indicated below.
WARNING:
Indicates that serious injury or even death
may result from insufficient attention to or incorrect compli-
ance with the related points.
CAUTION:
Indicates that personal injury or mechanical
damage may result from insufficient attention to or incorrect
compliance with the related points.
Symbols
The symbol indicates that the related section includes
safety warnings. Specific points of attention are indicated in-
side the symbol.
....... [General warning]
....... [Warning of danger of electrical shock]
....... [Warning of high temperature]
The symbol indicates that the related section includes in-
formation on prohibited actions. Specifics of the prohibited
action are indicated inside the symbol.
........ [Warning of prohibited action]
......... [Disassembly prohibited]
The symbol indicates that the related section includes in-
formation on actions which must be performed. Specifics of
the required action are indicated inside the symbol.
......... [Alert of required action]
........ [Remove the power plug from the outlet]
........ [Always connect the printer to an outlet
with a ground connection]
Please contact your service representative to order a replace-
ment if the safety warnings in the guide are illegible or if the
guide itself is missing. (fee required)
Caution
No liability is assumed for any damage caused by improper
installation.
Notice on Software
Software used with this printer must support the printer’s
emulation mode. The printer is factory-set to emulate the
PCL. The emulation mode can be changed by following the
procedures described in
.
Notice
The information in this guide is subject to change without no-
tification. Additional pages may be inserted in future edi-
tions. The user is asked to excuse any technical inaccuracies
or typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user
is following the instructions in this guide. No responsibility is
assumed for defects in the printer’s firmware (contents of its
read-only memory).
This guide, any copyrightable subject matter sold or provided
with or in connection with the sale of the page printer, are
protected by copyright. All rights are reserved. Copying or
other reproduction of all or part of this guide, any copyright-
able subject matter without the prior written consent of
Kyocera Corporation is prohibited. Any copies made of all or
part of this guide, any copyrightable subject must contain the
same copyright notice as the material from which the copying
is done.
Regarding Trademarks
PRESCRIBE is a registered trademark of Kyocera Corpora-
tion. KPDL and KIR (Kyocera Image Refinement) are trade-
marks of Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter
X24E is a product of International Business Machines Corpo-
ration. Epson LQ-850 is a product of Seiko Epson Corpora-
tion.
Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of Cen-
tronics Data Computer Inc. PostScript is a registered trade-
mark of Adobe Systems Incorporated. Macintosh is a
registered trademark of Apple computer, Inc. Microsoft, Win-
dows, and Windows NT are registered trademarks of Microsoft
Corporation. PowerPC is trademark of International Business
Machines Corporation. CompactFlash is a trademark of
SanDisk Corporation. ENERGY STAR is a U.S. registered
mark. All other brand and product names are registered trade-
marks or trademarks of their respective companies.
This Kyocera Mita page printer uses PeerlessPrintXL to pro-
vide the HP LaserJet compatible PCL 6 language emulation.
PeerlessPrintXL is a trademark of The Peerless Group, Re-
dondo Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time
Operating System and Tools from Wind River Systems.
This printer contains UFST™ and MicroType
®
from
Agfa Corporation.