Kyocera ECOSYS FS-9520DN - Manual (Page 55)

Chapter 3 Using the Operator Panel
3-34
Repeat above steps until you have transferred all
data (files) that you want to write to the hard disk.
Each time you finish writing data, a hard disk write
information page is printed from the printer show-
ing the information explained in step 8 above, but
pertaining only to the data just written. To see all
data contained in the hard disk at once, print a list
of data names as explained. See
Printing a List of
Data Names on page 3-34 .
Deleting Data
It is possible to use the printer to delete data from a hard disk
one by one. To delete data from a hard disk, proceed as fol-
lows.
Check that the hard disk contains data. Otherwise, the
>Delete Data menu will not appear on the message display.
Press the MENU key.
Press the or key repeatedly until Hard Disk >
appears.
Press the key.
Press the or key repeatedly until >Delete
Data appears. The data name also appears.
Press the ENTER key. A blinking question mark (?)
appears before the data name.
Press the or key to display the desired data
name.
Press the ENTER key. Processing appears and the
data is deleted from the hard disk. The message dis-
play returns to Ready.
Printing a List of Data Names
The printer prints a list of all data names (referred to as par-
titions) stored in a hard disk for reference. To print a list of
data names for the hard disk, proceed as follows.
Press the MENU key.
Press the or key repeatedly until Hard Disk >
appears.
Press the key.
Press the or key repeatedly until >List of
Partitions appears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key. Processing appears and the
printing of the list starts.
Figure 3-14
The printout (example above) includes the following
information;
Device Name/Number: HARD DISK/0 is indicated
for the hard disk.
Capacity: The total capacity of the hard disk
in bytes.
Used Space: The total size of the data stored in
the hard disk in bytes.
Free Space: The size of the capacity remaining in
the hard disk for storing further data,
including the amount of memory that
the printer uses for its system.
Partition Name: The name of the written data
assigned automatically by the printer.
Hard Disk >
>Delete Data
DataH001
>Delete Data
?DataH001
9
1
2
3
4
5
6
7
Hard Disk >
>List of
Partitions
>List of
Partitions ?
1
2
3
4
5
6
Partition Information
Device Information
PARTITION LIST