Konica Minolta Fax Kit (FX-3) User Manual
User manual, Fax kit (fx-3)
Table of contents
Document Outline
- Contents
- Ch.1 Introduction
- Ch.2 Precautions
- Ch.3 Faxing
- 3.1 Dialing
- 3.2 Transmission Settings
- 3.3 Basic Faxing
- 3.4 Confirmation Mode
- Checking the Machine’s Counters
- To check the counters
- Checking Transmission Results
- To check the transmission result
- Outputting a report/list
- To output a report/list
- Transmission Result Report
- Reception Result Report
- Activity Report
- Memory Data List
- Memory Image Print
- List of One-Touch Dial Keys
- List of Speed Dial Numbers
- Key Setting List
- Relay Box List
- Machine Status List
- Configuration Page
- PCL Font List
- Ch.4 Fax Transmission/ Reception Methods
- 4.1 Transmission Methods
- Memory Transmission
- To specify Memory TX
- Direct Transmission
- Manual Transmission
- To send a fax manually
- Batch Transmission
- To fax using batch transmission
- Broadcast Transmission
- To fax using broadcast transmission
- Timer Transmission
- To fax using timer transmission
- Mailbox Transmission
- To fax using mailbox transmission
- Relay Initiation Transmission
- To fax using relay initiation transmission
- Relay Broadcast Transmission
- Polling Transmission
- To set up polling transmission
- To delete a document from the polling transmission setup
- Canceling (Deleting) a Document Queued in the Memory for Transmission
- To cancel a queued document
- 4.2 Reception Methods
- 4.1 Transmission Methods
- Ch.5 Using the Utility Mode
- Ch.6 Using the Utility Mode (Fax)
- 6.1 Setting Up the Fax Registration
- Selecting the “FAX REGISTRATION” menu
- Setting Up One-Touch Dialing (“ONE-TOUCH DIAL” function)
- To program a one-touch dial key
- To change/delete a programmed one-touch dial key
- Specifying the Setting for “SPEED DIAL”
- To program a speed dial number
- To change/delete a programmed speed dial number
- Specifying the Setting for “GROUP DIAL”
- To program a group of fax numbers
- To change/delete a programmed group of fax numbers
- Specifying the Setting for “PROGRAM DIAL”
- To set program dialing
- To change/delete a programmed broadcast transmission
- To change/delete a programmed timer transmission
- To change/delete a programmed mailbox transmission
- To change/delete a programmed polling reception
- To change/delete a programmed relay initiation transmission
- Specifying the Setting for “BATCH TX”
- To set batch transmitting
- To change the batch transmission setting
- To delete the batch transmission setting
- Specifying the Setting for “MAILBOX”
- To register a mailbox
- To delete a mailbox
- Setting Up Relay Boxes (“RELAY BOX” function)
- To program the relay box
- To delete the relay box
- 6.2 Setting Up the Transmission
- 6.3 Setting Up the Reception
- Selecting the “RX OPERATION” menu
- Specifying the Setting for “MEMORY RX MODE”
- To cancel memory reception
- Specifying the Setting for “NO.of RINGS”
- Specifying the Setting for “REDUCTION RX”
- Specifying the Setting for “RX PRINT”
- Specifying the Setting for “RX MODE”
- Specifying the Setting for “FORWARD”
- Specifying the Setting for “FOOTER”
- Specifying the Setting for “SELECT TRAY”
- Specifying the Setting for “CLOSED NETWORK”
- 6.4 Settings Up the Communication
- 6.5 Setting Up the Report Output
- 6.6 Specifying Initial User Data
- 6.1 Setting Up the Fax Registration
- Ch.7 Appendix
- Ch.8 Index