Konica Minolta Fax Kit (FX-3) - Manual (Page 81)

5 5.1 Utility Mode
5-2 Fax Kit (FX-3)
Us
ing th
e Ut
ility
Mo
de
Cha
p
ter 5
5.1 Utility Mode
There are sixteen menus in the Utility mode.
* Only the description for specifying settings for the fax functions is described here.
For details on the settings, refer to the Di1611/Di2011 User Manual.
✎
Note
Depending on the installed options and specified installation region, some Utility
mode functions cannot be set.
No. Name Description
1 MACHINE SETTING Used to specify settings for the machine’s operating environment.*
2 PAPER SOURCE
SETUP Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
3 USER MANAGEMENT For details on this menu, refer to the Di1611/Di2011 User Manual.
4 ADMIN. MANAGEMENT
5 COPY SETTING 1
6 COPY SETTING 2
7 FAX REGISTRATION Used to specify the default setting for each fax function.
8 TX OPERATION Used to specify the default setting for TX operation.
9 RX OPERATION Used to specify the default setting for RX operation.
10 COMM. SETTING Used to specify the default setting for communicating environment.
11 REPORTING Used to specify the default setting for each report function.
12 INITIAL USER DATA Used to specify setting for the initializing user data.
13 NETWORK SETTING Available only if the optional Network Interface Card NC-6 is installed.
For details, refer to the User Manual for the Network Interface Card
(NC-6).
14 E-MAIL SETTING1 Available only if the optional Internet Fax & Network Scan Kit SU-6 is
installed. For details, refer to the User Manual for the Internet Fax &
Network Scan Kit (SU-6).
15 E-MAIL SETTING2
16 SCAN SETTING