Konica Minolta Fax Kit (FX-3) - Manual (Page 135)

6 6.5 Setting Up the Report Output
6-46 Fax Kit (FX-3)
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
6.5 Setting Up the Report Output
From the “REPORTING” menu, various functions are available for specifying which
reports are automatically printed.
* By installing the optional Network Interface Card, settings can also be specified from the network tool
PageScope Light. (p. 6-53)
Selecting the “REPORTING” menu
1 Press the [Utility] key ten times.
“REPORTING” appears.
2 From the 10-Key Pad, press the key ([1] through [4]) for the “REPORTING”
function that you wish to set.
❍ The “REPORTING” functions are as follows:
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT REPORT
No. REPORTING Characteristic/Description
1 ACTIVITY REPORT Every 60 transmissions/receptions, a report can be printed to show the
results of the transmissions/receptions. This function can be used to set
whether the report is printed automatically when the 60th transmission/
reception is reached.
• The manufacturer’s default setting is “ON”.
2 RESERV.REPORT If multiple recipients are specified for transmission, such as with
broadcast transmission and polling reception, a report can be printed to
show specified settings. This function can be used to set whether this
report is printed automatically.
• The manufacturer’s default setting is “OFF”.
3 TX RESULT REPORT This function can be used to set whether the report showing the result of
a transmission is printed automatically after the transmission is finished.
• The manufacturer’s default setting is “OFF”.
4 RX RESULT
REPORT This function can be used to set whether the report showing the result of
a reception is printed automatically after mailbox reception is finished. (If
regular reception is not finished normally, a report will always be printed,
regardless of the selected setting.)
• The manufacturer’s default setting is “OFF”.