Kodak 3000DSV-E - Manual (Page 41)

3-18 A-61371 September 2004
Calling the Job Program To call a registered Job Program:
1. Press the Shift key and the Job Recall key together.
Each time the Job Recall key is pressed while the Shift key is held
down, the display is cycled in order of 1J to 2J to 3J.
When the desired setting is displayed, release the keys.
Using Electrical
Zoom
In addition to using the lens to zoom, the electrical zoom function has
been provided for magnifying the image when it is printed.
Zoom+: When the Zoom+ key is pressed with the Shift key, the
magnification is increased by an increment of 0.01X (up to 2.00X).
Zoom-: When the Zoom- key is pressed with the Shift key, the
magnification is decreased by a decrement of 0.01X (down to 0.50X).
NOTE: The Zoom magnification is displayed in the Multi-Print display to
2 decimal places.
The Zoom magnification level is displayed in the Exposure display.
Example: When the magnification is 0.50X, it is displayed as 50. When
the magnification is 1.50X, it is displayed as 50 also. When the Zoom
magnification is changed, the display is made in the Multi-Print display
as follows.
When it is returned to the standard magnification, this display goes off.
When the Zoom function is used, Multi-Print can be set only up to 9.
Job Recall