Kodak 3000DSV-E - Manual (Page 16)

A-61371 September 2004 2-1
2 Control Panel and Functions
Following are descriptions of the Control Panel functions. Some
functions are available by using the Shift key and some of the functions
provide access to optional accessories. This chapter provides an
overview of each function.An overview of the image processing
features are also described in this chapter. Chapter 3, Using the
Scanner, provides procedures on how to use each function.
Control Panel - Standard
1 Memory Input Key — to store one of the following functions into
the memory of the scanner, first set one of the functions on the
Control Panel and then press this button with the head of a pen or
other device. The next time the scanner is turned on, that function
will appear as a default setting until a new one is entered. A
maximum of three settings can be memorized.
• Negative or positive
• Print mode
• Print position*
• Paper size
• Print image density
• Exposure mode
• Centering or Fit
• Manual Masking
• Auto Masking
• Auto Skew Correction
• Horizontal Area setting
• Vertical Area setting
• Electrical Zoom magnification
• Resolution
• Image Distortion Correction
*If the current paper tray or cassette is different from the paper tray/cassette that is
loaded when the Paper size setting was made, Center Image Print is selected for
the print position and the current paper size is selected.
NOTE: If you do not press the Memory Input key within 60 seconds
after a setting has been made with the Auto Reset function set
to On, the previous setting remains valid.
Start 10 1 C
Auto Lighter Darker
Exposure Paper Selection Print Position Print Mode
Text
Fine
Photo
Film Type
Auto
Nega
Posi 1 2
A4
A3
A4
Paper Selection
11 Ч 17
1 2 /
8 Ч 11
8 Ч 11
8 Ч 14
1 2 / Ohter
1 2 /
1
2 3 4 5 6
7 8
9 12 13 14 10
11 15