Konica Minolta Konica Digital Revio KD-300Z - Manual (Page 18)

31 30
Using Color Mode for B&W and Sepia Images
In addition to the normal color picture mode, you can also take pictures
in black and white (B/W) or sepia tone (Sepia).
¶ B/W and sepia picture modes cannot be selected when image quality is set
for uncompressed TIFF-RGB [T] format.
1 Press the “MENU” button.
2 Press the “ #” button to select
[ ], then press the “ ”
button to confirm the selection.
3 Select [COLOR MODE], then
press the “ #” button.
4 Press the “ %” or “fi” button to
select either [SEPIA] or [B/W]
mode.
5 Press the “ @” button.
6 Press the “MENU” button
twice to turn off the menu
display.
7 Press the shutter release
button to take the picture.
Display
appearance
when
[SEPIA]
mode is
selected.
White Balance
An image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
[AUTO] (default) In this mode, the white balance is set automatically by
the camera.
[ ] Bright sun
[ ] Incandescent light bulbs (Tungsten)
[ ] Cloudy weather
[ ] Fluorescent light
[PRESET] Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 33.
1 Press the “MENU” button.
2 Press the “ #” button and
select [ ], then press the
“ ” button to confirm the
selection.
3 Press “ %” or “fi” button to
select [WB MODE], then press
the “
#” button.
4 Press “ %” or “fi” button to
select the desired white
balance mode ([
], [ ],
[ ], or [ ]).
2001.7.6, 6:09 PM Page 30-31