Using the optical viewfinder – Konica Minolta Konica Digital Revio KD-300Z User Manual
Page 11
19
18
“Beep”
“Beep,
beep”
Card access LED
Caution LED
5. Press the shutter release
button to take the picture.
1 Lightly depress the shutter
button halfway to begin
focusing; the focus mark will
light and the electronic beep
will be heard when focus is
locked.
Turning the LCD monitor off will
help conserve battery power.
Turning LCD monitor OFF (page 76)
1. Set the mode select lever to
“
”, then press the
“POWER” button to turn power
ON.
2. Press the “DISPLAY” button to
turn off the LCD monitor.
3. Hold the camera steadily as
shown to prevent camera
shake.
¶ See Steady> on page 14. Using the optical 4. Look through the optical viewfinder while composing Press the “T” button to enlarge ¶ Parallax: see page 25. Using the Optical Viewfinder ¶ Your next picture can be taken when the caution LED stops W T W T 2 Press down further on the shutter release button to take 3 The caution LED and card access LED will light while the 2001.7.6, 6:07 PM Page 18-19
viewfinder to compose
your picture.
your image.
the subject, and the “W” button to
reduce the size of the subject.
viewfinder, take note of the
distance to your subject. As
distance to the subject
decreases, parallax (the
difference between what you
see in the viewfinder and the
actual image recorded through
the lens) increases. When
accurate subject composition
is required, use the LCD
monitor to take your pictures.
flashing.
the picture; recording of the
image begins when the
electronic beep sound.
camera is writing image data to
the memory card.