Erasing a part of a track, 1 turn the part to be erased into one track, 2 erase the part to be erased – Kenwood HM-381MD User Manual
Page 60: Track divide u, Track erase o md edit functions
Application section
HM-381MD (En)
60
A
B
C
1
2
5
3
4
A
B
C
1
2
4
3
A
B
C
1
2
5
A
B
1
2
3
C
3
4
A
B
D
1
2
4
3
C
A
B
1
2
3
D
4
Erasing a part of a track
1 Turn the part to be erased into one track by using the TRACK DIVIDE function.
2 Erase it by using the TRACK ERASE function.
Use the following procedure to erase the desired part of a track.
After editing, eject and remove the mini disc.
Image of erasing one track (TRACK ERASE)
Track to be erased
Track Nos. are adjusted.
1 Turn the part to be erased
into one track.
Use the TRACK DIVIDE function
to turn the part you want to
erase into one track.
2 Erase the part to be erased.
Use the TRACK ERASE function
to erase the “track” (part you
want to erase) made in step
1.
÷ If it is required to erase only the first or second half of a
track, only one TRACK DIVIDE operation is enough.
Should be approx. 2 sec.
or longer.
Should be approx. 2 sec.
or longer.
The part divided with TRACK DIVIDE
becomes one “track”.
Execute TRACK
DIVIDE twice.
Part to be erased
TRACK DIVIDE
U
The space left after erasing is filled by subse-
quent tracks which move along.
Part to be erased
Track No. is
adjusted.
Execute
TRACK ERASE once.
TRACK ERASE
O
MD Edit Functions
“WRITING” displayed during the minidisc ejection
operation indicates that the data associated with
recording or editing is being written on the disc. Do
not apply vibration or shock to the unit while this
message is displayed.
The MD operates on the basis of the information
read from the disk into memory. Always remove the
minidisc after title input or editing.