Kenwood HM-381MD - Manual (Page 32)

HM-381MD (En)
32
Basic section
Recording on TAPE
Note that this cassette deck cannot record onto
Metal tapes.
Note Note
1. Load a tape in deck.
1 Open the door of deck.
2 Insert a tape.
3 Close the door.
÷ Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
÷ When recording is started, the tape is
transported in the direction selected in
this step.
÷ Wind the tape to the position where
recording is to be started.
1 Press the play key.
2 Press the play key again.
3 Stop playback.
To reverse the transport direction
Check the tape transport direction indicator. §
3. Set the recording condition.
Select the reverse mode.
¶
Let's recording
Pause the recording Stop the recording Stop the recording
2 2
3 3
2 2
4 4
1 1
3 3
5 5
push open
0
1 1
TAPE
direction
2 2
2 2
menu
set/demo
VOLUME / multi control
3 3