Kenwood VR-9080 - Manual (Page 39)

39 EN
Ambience effects
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
SOUND LISTEN MODE
MULTI CONTROL STEREO
STEREO
SOUND
RCV MODE
1 For the remote control unit, press the RCV MODE key to switch
to receiver mode.
2 Press the SOUND key and then use the 5/∞ keys or MULTI @/
# keys until the desired item appears in the display.
Each time you press the 5/∞ keys or MULTI @/# keys, the menu
changes as follows:
Note that some items are not displayed depending on speaker
settings and listening modes.
1 CNTR (Center speaker level adjustment)*
2 SR (Surround Right speaker level adjustment)*
3 SB (Surround Back speaker level adjustment)*
4 SBR (Surround Back Right speaker level adjustment)*
5 SBL (Surround Back Left speaker level adjustment)*
6 SL (Surround Left speaker level adjustment)*
7 SUBW (Subwoofer level adjustment)*
8 INPUT (Input level adjustment - analog mode only)
•
9 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS mode
only)
0 PANORAMA (Panorama mode ON/OFF)**
- DIMENSION (Dimension adjustment)**
= CENTER WIDTH (Center width adjustment)**
~ CENTER IMAGE (Center image adjustment - Neo:6 Music mode
only)
! DUAL MONO (Dual Mono selection - Dolby Digital mode only)
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off.
** Pro Logic IIx Music and Pro Logic II Music mode only.
• If you have selected “SB NML/THXx1” or “SB LARGEx1”, “SBR”
and “SBL” are not appeared but “SB” is appeared on the Display.
3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 20 seconds.
4 Press the SOUND key again to return to the input indication.
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specified heavy sound passage of the Dolby Digital and DTS sound track (like
scenes with sudden increases in volume) to minimize the difference in volume
between the scenes with heavy sound passage and scenes with normal sound
passage. This makes it easy to hear all of the sound track, even when listening
at low volumes.
1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#
keys until “MIDNIGHT” appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the input signal is set to “Dolby Digital”
or “DTS”.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select the
ON or OFF setting.
L
SL S SB SR
C R
LFE
SP MUTE
A B CLIP
DIGITAL DOLBY DIGITAL STEREO AUTO DETECT
• The adjustment item is displayed for approximately 20 seconds.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
3 Press the SOUND key again to return to the input indication.
Panorama mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
When listening to music, you will be able to enjoy the “wrap-around”
sound effect when you adjust the panorama mode.
1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#
keys until “PANORAMA” appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
L
S SB
R
LFE
SP MUTE
A B CLIP DOLBY PL II x
STEREO AUTO DETECT
3 Press the SOUND key again to return to the input indication.
05.7.16, 1:28 PM 39