Kenwood VR-9080 - Manual (Page 19)

19 EN
Setting up the system
Connecting to the AV AUX jacks
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
• This model has a game function which is convenient for using
game equipment.
It is recommended that the game equipment be connected to
AV AUX jacks and the game mode be turned ON.
¶
• To select the source connected to the AV AUX jacks press AV
AUX/GAME key. ¶
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the component with the S VIDEO cord, you
can enjoy better picture quality.
S VIDEO VIDEO L-AUDIO-R
AV AUX/GAME
Video game, camcorder,
other VCR or portable
MD Player
S VIDEO OUT
S VIDEO cord
VIDEO OUT
AUDIO OUT
Connecting the antennas
The broadcast reception cannot be made unless the antennas are
connected. Connect the antennas correctly as instructed below.
AM Loop Antenna
Place the supplied loop antenna as far as possible from the receiver, TV
set, speaker cords and power cord, and adjust the direction for best
reception.
AM Antenna Terminal connections
1 Push lever. 2 Insert cord. 3 Release lever.
FM Indoor Antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM Antenna Terminal connections
VR-9080 KRF-X9090D
Insert Connector.
FM Outdoor Antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the 75Ω FM terminal.
FM
75
GND
AM
ANTENNA
AM Loop Antenna
FM Indoor Antenna
Use an antenna
adaptor
(Commercially
available)
Attach to the stand
FM Outdoor Antenna
VR-9080
KRF-X9090D
05.7.16, 1:23 PM 19