Kenwood VR-9080 - Manual (Page 31)

31 EN
Listening to radio broadcasts
This model can store up to 40 stations in the memory and recall them by
one-touch operation.
Tuning radio stations
MULTI CONTROL
INPUT
SELECTOR
BAND
AUTO/MONO
1
Use the INPUT SELECTOR key or the TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band.
L
SL S SB SR
C R
LFE
SP MUTE
A B CLIP
STEREO
AUTO
3
Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
“AUTO” indicator lights up in the display.
RDS
RTY STEREO
AUTO
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or MULTI % / fi keys, or
TUNING 1 / ¡ keys to select the station.
“STEREO” lights when a broadcast is being received in stereo.
AUTO
MEMO
STEREO
TUNED
STEREO
“TUNED” is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob or use the MULTI %/fi keys to
select the desired station.
Presetting radio stations manually
MULTI CONTROL
MEMORY/ENTER
1
Tune to the station you want to store.
2
Press the MEMORY/ENTER key while receiving the station.
Blinks for 20 seconds Lights for 20 seconds
L
SL S SB SR
C R
LFE
SP MUTE
A B CLIP
MEMORY
STEREO
AUTO
STEREO
TUNED
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY/ENTER
key again).
3
Use the MULTI CONTROL knob to select one of the station
presets (1 – 40).
4
Press the MEMORY/ENTER key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
05.7.16, 1:26 PM 31