Kodak DP2900 - Manual (Page 8)

User Guide KODAK DP2900 Digital Projector
viii
Safety Issues
• Warning: Don’t look directly into the lens when the lamp is turned
on.
• Warning: To replace the lamp, turn the projector off by
unplugging the power cord. To avoid burns, wait 30 minutes
before opening the lamp door. Follow all instructions provided
in this User’s Guide.
• Warning: Please use the power cord provided. Connect the
power cord to a receptacle with a protective safety (earth)
ground terminal.
• Warning: Refer all service to qualified service personnel.
Servicing your own projector will void the warranty. See the
following page for the customer service contact information.
• Caution: Don’t block ventilation openings.
• Caution: Don’t set liquids on the projector. Spilled liquids may
damage your projector.
• Caution: Don’t place the projector on a hot surface or in direct
sunlight.
• Caution: Do not drop the projector. Transport the projector in an
KODAK-approved case. For accessory information go to our Web
site at www.kodak.com/go/projectors.
Important Operating Considerations
Do not place the projector on a tablecloth or other soft covering that
may block the vents. In the unlikely event of the bulb rupturing,
thoroughly clean the area behind the projector and discard any edible
items placed in that area.
Do not place objects in
this area behind the projector
2 f
t (.
6m)