Kodak DP2900 - Manual (Page 54)

User Guide KODAK DP2900 Digital Projector
54
Image Source
Problem Cause and Solution
The S-Video image source
does not appear. Some inexpensive cables are not
compatible with the projector. Be sure to
use a high quality cable.
Only the start-up screen
appears and not the image
from the image source. • Verify that the cables are connected
correctly.
• Verify that the proper image source is
connected and that it is selected on the
Setup tab of the menus.
• Make sure that the image source is
turned on.
• Turn off everything and power up again
in the proper order.
• Make sure that your laptop's external
video port is turned on. See the
computer manual for details.
• Make sure your computer’s video board
is installed and configured correctly.
• Make sure your computer has a
compatible video board. The projector
isn’t CGA, EGA or SXGA compatible.
• If you’re using Windows 98:
1.Open “My Computer” icon, the
Control Panel folder and then the
Display icon.
2.Click the Settings tab.
3.Verify that the Desktop area is set to
1024x768 or less.
No image is displayed • Make sure that you have removed the
lens cap.
• Make sure that the lamp is switched on.