Kodak DP2900 - Manual (Page 52)

User Guide KODAK DP2900 Digital Projector
52
Image is "noisy" or streaked. Try these steps in this order.
1. Deactivate the screen saver on
your computer.
2. Turn Auto Image off and then
back on again. See “Auto
Image” on page 36.
3. Turn Auto Image off and adjust
the synchronization and
tracking manually to find an
optimal setting. See “Manual
Sync (computer source only)”
on page 37 and “Manual
Tracking (computer source
only)” on page 37.
• Try connecting to another computer.
The problem could be with your
computer's video card.
Image is wider at the top or
bottom of the screen. This keystoning effect is caused by the
projection angle not being perpendicular
to the screen. Adjust the keystoning. See
“Keystone (computer source only)” on
page 35.
Image is wider at one side
than the other Make sure the projector is at a 90 degree
angle to the screen.
Projected colors don't match
the computer or video source
colors. Use the KODAK Image Manager to
select a setting that is more acceptable.
Important: The KODAK Image Manager
settings work best if you select
Reset from the Adjust Tab each
time before selecting an Image
Manager setting.
If further adjustment is needed, optimize
the brightness, tint, color and contrast
from the Image Menu.
Problem Solution