Kodak DP2900 - Manual (Page 49)

Maintenance & Troubleshooting
49
Replacing the Batteries in the Remote
Control
The life of the batteries depends on how often and how long you use
the remote. Symptoms of low battery charge include erratic responses
when using the remote and a reduced range of operation.
Follow these steps to replace the batteries:
1. Turn the remote face down in your hand.
2. Slide the battery cover off the end of the remote.
3. Remove the old batteries and dispose of them in an
environmentally proper manner.
4. Install two new AAA alkaline batteries. Make sure you install
each in the correct direction.
5. Slide the battery cover back on the remote.
Using the Security Lock
The projector has a security connector for use with a PC Guardian
Cable Lock System. (This Lock System must be purchased
separately.) Refer to the information that came with the lock for
instructions on how to use it to secure the projector.