Kyocera FS-1700 - Manual (Page 98)

5.5 Indicators and Messages
5-11
,
, (image FITting) flashes to indicate that a loss of raster data occurred when
the data was compressed to be fitted within the currently available memory.
Flashing
, extinguishes automatically when the job times out; the printer
receives the next data from the host computer; or if you press any key on the
printer's control panel. Try adding more memory in the printer to prevent this
error.
!<<
?<<
Change of the resolution indicator from
!<< to ?<< (flashing) means that the
job in 600-dpi resolution was not able to run within the currently available mem-
ory. The resolution reverts to
!<< dpi automatically when the job times out; the
printer receives the next data from the host computer; or if you press any key on
the printer's control panel. Try adding more memory in the printer to prevent this
error.
Message Corrective Action