Kyocera FS-1700 - Manual (Page 63)

2.6. Ecoprint mode
2-16
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to
2II. Try printing the status page again. If you
still get dark vertical stripes, adjust the print density control to a
lighter setting. (See the last page in this manual.)
White vertical stripes
Set the KIR mode to
2Q. Try printing the status page again. If you still
get white vertical stripes, adjust the print density control to a darker
setting. (See the last page in this manual.)
2.6. Ecoprint mode
The Ecoprint enables you to reduce the amount of
toner consumed on the page so as to save your
printing costs. You can set to Ecoprint mode on, as
follows. (The factory-setting is
RII. )
The Ecoprint mode setting is
2Q when the printing
image becomes lighter, yet very readable.
☛
The Ecoprint setting has no effect on the
print speed.
Ecoprint setting is
2II (default).
Ecoprint setting is
2Q.