Kyocera FS-1700 - Manual (Page 81)

4.1. Toner Kit Replacement
4-2
Supplying Toner
☛
Before proceeding, take note of the following:
Do not leave floppy disks etc. lying around while performing this maintenance
procedure. This procedure tends to raise a little toner dust which can harm
magnetic recording media.
Do not attempt to reuse the waste toner remaining in the toner container.
Use only the toner kit exclusively designed for the printer. Use of a toner kit
intended for use with other printer models may damage the printer and void
the warranty.
To replace the toner container, proceed as follows.
1. Open the printer's top cover all the way.
2. Press the toner container release lever ( Green )
to release the old toner container from the
printer. Remove the old toner container as gen-
tly as possible.
☛
Keep the toner container as level as pos-
sible while removing.
3. Put the old toner container in the plastic bag
supplied with the toner kit. Dispose of the toner
container.
☛
The old toner container may be inciner-
ated without the risk of generating
harmful gas.
4. Take the new toner container from its bag.
With the label side down, thoroughly shake the
toner container (in the direction of the arrow)
ten times or more to loosen and mix the toner
inside.
Top Cover
Old Toner
Container
Toner Container
Release Lever (
Green )
Old Toner Container
Plastic Bag
New Toner Container