Kyocera FS-1700 User Manual
Kyocera Printers
Table of contents
Document Outline
- Table of Contents
- 1.1. Positioning the Printer
- 1.2. Unpacking and Inspection
- 1.3. Names of Parts
- 1.4. Setting Up and Interfacing
- 1-Open the Top Cover
- 2-Install the Toner Container
- 3-Close the Top Cover
- 4-Install the Waste Toner Bottle
- 5-Add Paper
- 6-Open the Paper Stopper on the Face-down Output Tray
- 7-Install the Face-up Output Tray (if required)
- 8-Connect the Printer to the Computer
- 9-Attach the Power Cord
- 10-Print a Status Page
- 11-Test the Interface with the Computer
- 12-Set the Emulation Mode
- 13-Install the Printer Driver
- 1.5. Multi-Purpose Tray Feeding
- 1.6. Memory Card
- 1.7. Memory Expansion Installation
- 2.1. Control Panel
- 2.2. Operating Procedures
- 2.3. Using the Mode Select Menu
- 2.4. Sleep (Ecopower) Mode
- 2.5. KIR Level
- 2.6. Ecoprint mode
- 2.7. Resource Protection
- 2.8. Adjusting the Print Density
- 2.9. Setting the Audio Warning (Buzzer)
- 2.10. Operating a Memory Card
- 3.1. Resident Fonts
- 3.2. List of Fonts
- 3.3. Symbol set
- 4.1. Toner Kit Replacement
- 4.2. Cleaning
- 5.1. General Guide
- 5.2. Power Problems
- 5.3. Interface Problems
- 5.4. Print Quality Problems
- 5.5 Indicators and Messages
- 5.6. Correcting a Paper Jam
- 6.1. HP LaserJet 5M Symbol Sets
- Printer Specifications
- B.1. General Guidelines
- B.2. Selecting the Right Paper
- B.3. Special Paper
- C.1. Parallel Interface
- C.2. RS-232C/RS-422A Interface
- C.3. RS-232C/RS-422A Protocol
- C.4. RS-232C Cable Connection
- Index
- Mode Select Menu