Kyocera FS-1700 - Manual (Page 6)

Introduction
v
Conforming to the Class B limits
❒
EF-1 Envelope Feeder
❒
DU-20 Duplexer
❒
HS-20 Paper Handler/Stacker
❒
PF-20 Paper Feeder
❒
PF-20mini Paper Feeder
❒
SO-6 Sorter/Stacker
❒
ST-20 Bulk Paper Stacker
Interface connectors
Important note on the interface connectors
Be sure to turn off printer power before connecting or disconnecting an interface cable to the
printer. For protection against static discharge which may be applied to the printer's internal elec-
tronics through the interface connector(s), keep any interface connector which is not in use
capped using the protective cap supplied.
☛
Use shielded interface cable.
Safety information
Laser safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since
radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the printer during any phase of user operation.