Sanyo MM-5600 - Manual (Page 89)

Controlling Roaming Charges Using Call Guard
Your phone has two ways of alerting you when you are roaming off
the Sprint Nationwide PCS Network: the onscreen roaming icon and
Call Guard. Call Guard makes it easy to manage your roaming charges
by requiring an extra step before you can place or answer a roaming
call. (This additional step is not required when you make or receive
calls while on the Sprint Nationwide PCS Network.)
To turn Call Guard on or off:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Roaming and press .
4. Select Call Guard and press .
5. Select On or Off and press .
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts directory,
Call History, or Messaging.)
2. Press or (or press Options [right softkey] and
highlight Call or Call:Speaker On and press ).
3. Press to proceed while the pop-up message is displayed.
– or –
Press any key to erase the pop-up message, press Options (right
softkey), highlight Roam Call, or Roam:Speaker On, and press
.
To answer incoming roaming calls with Call Guard on:
ᮣ Press Options (right softkey), highlight Answer or
Answer:Speaker, and press
.
– or –
1. Press or .
2. Press to proceed while the pop-up message is displayed.
Reminder: If the Call Guard feature is set to On , you need to take extra steps to
make and receive roaming calls, even if you have selected the Analog setting
(see the previous page).
Section 2D: Controlling Your Roaming Experience 75