Sanyo MM-5600 - Manual (Page 185)

Using the Macro/Normal Switch
The macro/normal switch located on the front of the phone allows
you to take close-up shots. Slide the macro/normal switch to switch
between Normal and Macro (close-up) modes. When you select
Macro mode, the
icon appears on the display.
Note: After using the camera for close-up shots (“Macro” mode), it is important
to switch the camera back to the “Normal” setting.
Note: Placing the switch in between the macro and normal setting may result in
out-of -focus images. For best results, slide the switch completely to one end or
the other.
Setting the Flash
To activate the flash:
1. From camera mode, press Options (right softkey).
2. Highlight Flash and press .
3. Select an option from the following and press .
Ⅲ Off to deactivate the flash.
Ⅲ On This Shot to activate the flash for one shot.
Ⅲ On Always to activate the flash all the time.
Ⅲ Auto to activate the flash automatically.
4. Take a picture using the phone’s main LCD as a viewfinder.
Tip: When the phone is open and in camera mode, press to switch
between flash modes.
Macro
Normal
Section 2L: Using Your Phone’s Built-in Camera 171