Sanyo MM-5600 - Manual (Page 202)

Selecting Camcorder Settings
To select your camcorder settings:
1. From video mode, press Options (right softkey).
2. Highlight Camcord.Settings and press .
3. Select an option from the following and press .
Ⅲ Resolution to select a file size (Good-176x144 or
Medium-128x96) for a video.
Ⅲ Video Quality to select video quality from Economy-30sec.,
Normal-20sec., Rich-15sec., or miniSD Rich-90min. (if available).
Ⅲ Silent Movie to select On to record without sounds. Select Off
to deactivate this feature.
Ⅲ Cue Sound to select a cue sound. (See “Setting the Cue Sound”
below for details.)
Ⅲ Skin Frames to select your favorite frame from Black Window,
Orange Ring, or Blue Crystal.
Ⅲ Save My Favorite to set your favorite setting. (See “Setting
Your Favorite Mode” on page 176 for details.)
Note: Recording time varies depending on the Video Quality.
Setting the Cue Sound
To select the Cue Sound:
1. From video mode, press Options (right softkey).
2. Highlight Camcord.Settings and press .
3. Select Cue Sound and press .
4. Select an option from the following and press .
Ⅲ Default plays the default cue sound.
Ⅲ “Action & Cut” notifies you with the pre-recorded words.
Ⅲ Off makes no sound.
Ⅲ Record Your Own allows you to record your own voice for
a cue sound. Select Start Sound or End Sound and press
.
Select Record, press , and press to start recording.
(Maximum recording time is 3 seconds for each setting.)
Section 2L: Using Your Phone’s Built-in Camera 188