Sanyo MM-5600 - Manual (Page 166)

Section 2K: Using Sprint PCS Ready Link 152
Making a Sprint PCS Ready Link Call by Entering a
Number
To place a Sprint PCS Ready Link call by entering a number:
1. From standby mode, enter the Sprint PCS Ready Link number
you want to dial.
2. Press to place the Sprint PCS Ready Link call. (Continue
holding to take the floor and speak.)
Ⅲ The contact’s name appears on the display if there is a
matched number in your Sprint PCS Ready Link List.
3. Continue with the Sprint PCS Ready Link call, pressing and
holding
to speak and releasing it to allow others to reply.
4. When the call is finished, press .
– or –
1. Press R-Link (left softkey) or press .
2. Press Go to (left softkey), highlight Enter R-Link# and press .
3. Enter the Sprint PCS Ready Link number you want to dial.
4. Follow steps 2-4 above.
Note: Sprint PCS Ready Link numbers must contain 10 digits (area code + phone
number) or 11 digits (1 + area code + phone number). Your Sprint PCS Ready Link
number is the same as your Sprint PCS Phone number.