Smart Technologies Interactive Whiteboard System 600i5 - Manual (Page 20)

W
W A R N I N G
When mounting the projector boom on a framed or hollow wall, attach both the mounting bracket
and the safety tether to a stud to safely support the projector’s weight. If you use only drywall
anchors, the drywall can fail, resulting in possible personal injury, and damage to the product which
may not be covered by your warranty.
Choosing a height
SMART includes a mounting template with each interactive whiteboard system. If you lose this
template, contact your authorized SMART reseller. Using this template ensures that you can do the
following:
l
Mount the projector at a safe height for head space clearance, while maintaining enough space
for airflow and installation access above the unit.
l
Position the projector at the correct height above your interactive whiteboard to align the
projected image with the touch screen.
Dimensions on the template recommend a distance from the floor suitable for adults of average
height. You should consider the general height of your user community when you choose a position
for your interactive whiteboard.
Securing your interactive whiteboard system
This section explains how to secure the different components of your interactive whiteboard system.
Locking the pen tray to your interactive whiteboard
To learn how to lock the pen tray to your interactive whiteboard, see the SMART Board 600 and D600
series interactive whiteboard installation and user’s guide ( smarttech.com/kb/001414 ).
Securing the projector to the boom
To learn how to secure the SMART UF75 or SMART UF75w projector to the boom, see the included
SMART Board 660i5,680i5, 685i5 or 690i5 interactive whiteboard system installation guide
( smarttech.com/kb/154547 ).
C H A P T E R 2
Installing your interactive whiteboard system
8