Swann SW244-8ML - Manual (Page 22)

OPERA
TION
The button descriptions related with the remote viewer’s operation are as follows:
<1CH> <2CH> <1&2CH>
Date/Time
Number of connecter
Current band-
width graph
Transmit
frames per
second
Transmission network band width
DVR Name
CONNECT / DISCONNECT
OSD
PTZ
MODE
SETUP
CAPTURE IMAGE
MIC
MUTE
AUDIO
SEQUENCE
DISPLAY MODE
NEXT GROUP
SCREEN MODE (FULL/NORMAL)
‰ SETUP
‰ STATUS
FUNCTIONS ON OFF
You can set audio output.
(1 channel or 2 channel or 1 & 2 channels Mix)
‰ AUDIO SETUP
‰ PTZ CONTROL
Please change display mode to 1 channel screen mode (want to control channel).
Click the PTZ icon and you can control Camera SPEED, FOCUS, DIRECTION, AUTO FOCUS and
ZOOM at upper window.
When you want to exit PTZ mode, click (search mode) or , (live mode) button.
When you connect the remote
viewer, you can select channel
that you want to connect. Set buffering time for stable video
transmission via network.
As buffering set time the video
transmission is delayed.
Set Duration time (0, 1, 2, 4, 8, 15, 30, 60 Sec).
If you check “Use the sequence mode at start up”, sequence mode will be started
when you connect to the A.I. DVR.