Siemens 300 - Manual (Page 47)

47
Settings
Example: setting the tone ringing volume
NE XT
Scroll to
Tone ringing
and confirm.
Tone ringing
O K
Tonering. volum e
Confirm tone ringing volume – you hear tone at the
O K current setting (default: level 6), see display.
Symbol for tone ringing
Dark bars indicate the current setting
– level 3 in this case
Save current setting (save)
Change the setting
NE XT Use the display key to set the required volume.
S A V E
Save the setting.
Note:
l
You can cancel each new setting before saving it by pressing
ß
.
You will then jump back to the higher-level display.
l
The language setting only refers to the display texts stored in the
mobile unit. The system text language, e.g. when a call is in progress,
corresponds to the Hicom 300 system setting.
Tonering, volume
NEXT SAVE