Siemens 300 - Manual (Page 19)

19
Putting into service
Note:
l
In the case of Hicom cordless E, the mobile units are not logged on to
stations (base stations), but rather to the Hicom 300 telephone system.
In this case,
Station
always means system.
l
An error tone is audible if the logon operation was not successful.
Activating/deactivating mobile units
Activating the mobile unit:
u
Press the On/Off key - you hear the acknowledgement
tone.
Display when telephone is "on" status, see page 8.
Deactivating the mobile unit:
u
Press the On/Off key until the display is clear – you hear
the acknowledgement tone.
Activating/deactivating keypad protection
This allows you to protect your mobile unit against inadvertent key activation,
e.g. when carrying it in your bag. Call are signalled even if keypad protection
is on and can be answered as in the same way as when the telephone is
switched on.
Prerequisite: mobile unit is activated.
Activating keypad protection:
u
Press the On/Off key for less than 1 second.
Keyboard Display when keypad protection is on.
protected
Deactivating keypad protection:
u
Press the On/Off key briefly – display when telephone
is "on", see page 8.