SMC Networks SMC2555W-AG - Manual (Page 60)

System Configuration
5-4
System Identification
The system information parameters for the SMC2555W-AG can
be left at their default settings. However, modifying these
parameters can help you to more easily distinguish different
devices in your network.
You should set a Service Set Identification (SSID) to identify the
wireless network service provided by the SMC2555W-AG. Only
clients with the same SSID can associate with the access point.
System Name – An alias for the access point, enabling the device
to be uniquely identified on the network. (Default: Enterprise AP;
Range: 1-22 characters)
SSID – The name of the basic service set provided by the access
point. Clients that want to connect to the network through the
access point must set their SSID to the same as that of the
access point. (Default: SMC; Range: 1-32 characters)