SMC Networks SMC2555W-AG - Manual (Page 125)

6-1
Chapter 6
Command Line Interface
Using the Command Line Interface
Accessing the CLI
When accessing the management interface for the
SMC2555W-AG over a direct connection to the console port, or
via a Telnet connection, the access point can be managed by
entering command keywords and parameters at the prompt.
Using the access point’s command-line interface (CLI) is very
similar to entering commands on a UNIX system.
Console Connection
To access the access point through the console port, perform
these steps:
1. At the console prompt, enter the user name and password.
(The default user name is “admin” and the default password is
“smcadmin.”) When the user name is entered, the CLI
displays the “SMC Enterprise AP#” prompt.
2. Enter the necessary commands to complete your desired
tasks.
3. When finished, exit the session with the “exit” command.