SMC Networks SMC2555W-AG - Manual (Page 135)

General Commands
6-11
General Commands
configure
This command activates Global Configuration mode. You must
enter this mode to modify most of the settings on the access
point. You must also enter Global Configuration mode prior to
enabling the context modes for Interface Configuration. See
“Using the Command Line Interface” on page 6-1
Default Setting
None
Command Mode
Exec
Example
Related Commands
end (page 6-12)
Command Function Mode Page
configure Activates global configuration mode Exec 6-11
end Returns to Exec mode GC, IC 6-12
exit Returns to the previous configuration
mode, or exits the CLI any 6-12
ping Sends ICMP echo request packets to
another node on the network Exec 6-13
reset Restarts the system Exec 6-14
show history Shows the command history buffer Exec 6-14
show line Shows the configuration settings for the
console port Exec 6-15
SMC-AP#configure
SMC-AP(config)#