SMC Networks SMC2555W-AG - Manual (Page 102)

System Configuration
5-46
CLI Commands for the 802.11a Wireless Interface – From the
global configuration mode, enter the interface wireless g
command to access the 802.11g radio interface. Set the interface
SSID using the ssid command and, if required, configure a name
for the interface using the description command. You can also
use the no ssid-broadcast command to stop sending the SSID
in beacon messages. Select a radio channel or set selection to
Auto using the channel command. Set any other parameters as
required. To view the current 802.11g radio settings, use the
show interface wireless g command.
SMC-AP(config)#interface wireless g 6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#description RD-AP#3 6-75
SMC-AP(if-wireless g)#ssid r&d 6-79
SMC-AP(if-wireless g)#channel auto 6-77
SMC-AP(if-wireless a)#ssid-broadcast 6-75
SMC-AP(if-wireless g)#select-antenna-mode right antenna 6-74
SMC-AP(if-wireless g)#radio-mode g 6-73
SMC-AP(if-wireless a)#transmit-power full 6-87
SMC-AP(if-wireless g)#speed 6 6-76
SMC-AP(if-wireless g)#max-association 32 6-88
SMC-AP(if-wireless g)#beacon-interval 150 6-79
SMC-AP(if-wireless g)#dtim-period 5 6-80
SMC-AP(if-wireless g)#fragmentation-length 512 6-81
SMC-AP(if-wireless g)#rts-threshold 256 6-82
SMC-AP(if-wireless g)#exit