Vlan, Vlan -100, Command line interface 6-100 vlan – SMC Networks SMC2555W-AG User Manual

Page 224

Text mode
Original mode

Command Line Interface

6-100

vlan

This command enables VLANs for all traffic. Use the no form to
disable VLANs.

Syntax

vlan enable
no vlan

Default

Disabled

Command Mode

Global Configuration

Command Description

• When VLANs are enabled, the access point tags frames

received from wireless clients with the VLAN ID configured
for each client on the RADIUS server. If the VLAN ID has not
been configured for a client on the RADIUS server, then the
frames are tagged with the access point’s native VLAN ID.

• Traffic entering the Ethernet port must be tagged with a

VLAN ID that matches the access point’s native VLAN ID, or
with a VLAN tag that matches one of the wireless clients
currently associated with the access point.

Example

Related Commands

native-vlanid (page 6-101)

SMC-AP(config)#vlan enable

Reboot system now? : y