Samsung iDCS 100 - Manual (Page 134)

12 11
MM (Minutes): Enter a number in the range of 00–59.
Failure to enter the time using the 24 hour clock will cause the date to
change at 12:00 P.M. Open customer programming and follow the instruc-
tions below.
ACTION DISPLAY
1. Press TRSF and then dial 505 OLD:6010184:0047
Display shows NEW:WMMDDYY:HHMM
2. Enter the new time and date using OLD:6010184:0047
the above format NEW:3020994:1445
3. Verify the time and date and reenter OLD:3020994:1445
them if necessary NEW:WMMDDYY:HHMM
4. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
If you have entered invalid data, you will receive an [ INVALID ENTRY ] mes-
sage for three seconds. Reenter the correct date and time. If the information
you entered is incorrect, repeat the procedure.
RESET STATION PASSCODES
TO DEFAULT
Individual keyset users can set or change their own individual passcodes.
These passcodes are used to lock and unlock keysets, override toll restric-
tion and access the DISA feature. At times, it may be necessary for the sys-
tem administrator to reset a station’s passcode to default “1234.” This pro-
gram cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 101 [201] PASSCODE
Display shows PASSCODE:✱✱✱✱
CHANGING FEATURE PASSCODE
You can change individual feature passcodes. This program is used to
change the passcodes for several features. These features are the following:
RING PLAN SERVICE, DISA ALARM, ALARM CLEAR, and AA RECORD.
Note: Each passcode is four digits long. Each digit can be 0 to 9.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode to default settings.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 202 CHANGE PASSCODE
Display shows RING PLAN: 0000
2. Use the UP and DOWN keys to scroll CHANGE PASSCODE
through the different options and press DISA ALARM:5678
the right soft keys.
3. Press HOLD to reset the passcode CHANGE PASSCODE
RING PLAN: 0000
4. Press TRSF to store and exit programming
OR press SPK to store and advance to the
next program
SET DATE AND TIME DISPLAY
Should it ever become necessary to correct the date and time displayed on
all of the keysets, do so as soon as you notice that they are incorrect. Auto-
matic Operating Mode will not work correctly and SMDR records will be of
no value when the date and time are not correct.
The display format is the following:
W (Day of the week): Enter 0 for Sunday and 6 for Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01–31.
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range of
00–24.
HOME PAGE Table of Contents Guide-Contents