Samsung SP-M305 - Manual (Page 48)

Using 3-5
MENU DESCRIPTION
Language Using this function, you can select the language used for the menu screen.
Menu Option • : You can move Menu Position up/down/left/right.
• : You can set the translucency of the menu.
•
---
• : You can set the display time of the menu.
•
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-
Sound
The projector comes with an internal 7W (mono) speaker. Use the settings below to tailor the sound as
desired.
• <100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Filter Check Time Sets the check period for the filter. (Unit: hours)
• -<100>-<200>-<400>-<800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for 1 minute whenever the projector is turned on.
Filter check message: "".
Auto Power On With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
ing the Power button.
• -
Sleep Timer With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
cally.
(There must be no button input from the remote control or the top of the projector for the specified
time)
• -<10 min>-<20 min>-<30 min>
This function does not work in mode.
Melody Set so that a melody plays when the Projector is turned on or off.
• - - -
Security To deter theft, you can set a password that users must enter when the projector powers on. When
you set a password, the projector will not work without it.
•
•
: Enter your current password and set the protection function to off.
• : Enter a new password and set the protection function to on.
• : Change your current password.
• Use the displayed number keys to enter or change the password.
• If you forgot your password, contact a Samsung Service Center.
Panel Lock You can disable the buttons on the projector body so that the proj ector can only be ope rated by the
remote control.
• -
Information You can check external source signals, picture setup, and PC picture adjustment.