Samsung SP-M305 - Manual (Page 45)

3-5 Using
3-5-3. Setup
MENU DESCRIPTION
Install To tailor the picture to the installation location, (for example, behind a semi-transparent screen, hang-
ing from the ceiling), you can invert the projected images vertically / horizontally.
• : Normal Image
• : Horizontal/Vertical Reversed Image
• : Horizontally Reversed Image
• : Vertically Reversed Image
Lamp Mode Using this function, you can set the image brightness by adjusting the amount of light generated by
the lamp.
• : This mode is optimized for screens smaller than 100 inches.
This mode decreases the lamp brightness and power consumption in order to extend the lamp
lifetime and reduce noise and power consumption.
• : This mode maximizes the lamp brightness when the ambient illumination is bright. As
the brightness of the lamp increases,
the lamp lifetime may be reduced and the noise and power
consumption may increase.
Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the
function to so that the function automatically starts.
• -
V-Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone func-
tion.
• The sound output of your projector is temporarily stopped while the keystone is being
changed.
• Keystone does not compensate for distortion in the On Screen Display (OSD) menu.
Background You can selec t an image or screen which will appear when there is no signal from the external device
connected to the projector.
-< Custom Logo >--
The recommended resolution for a picture to be set as the user logo is 600x300.
Test Pattern A default test pattern built into the projector. You can use it as a reference picture to optimize the
installation of the projector and to optimize images.
• : You can check whether the picture is distorted or not.
• : You can reference and display picture format sizes such as 1.33 : 1 or 1.78 : 1.