Sanyo scp 7500 - Manual (Page 87)

Using Your Phone’s Tools
Setting the Alarm Clock
To set the alarm clock:
1. Press to access the main menu.
2. Select Tools.
3. Select Alarm Clock.
Tip: Press (right softkey) to set the Ringer Length or
Snooze Interval .
4. Select the desired entry to access the Alarm Clock menu.
5. Select the box under the following items.
ᮣ Description to enter a description of the alarm.
ᮣ Time to enter the alarm time. Enter the desired alarm time and
press .
ᮣ Repeat to select the alarm frequency.
ᮣ Alarm to set the alarm On or Off.
6. Press (left softkey) to save the alarm settings.
Note: Depending on the Power On to Alert setting, the alarm setting will
be active even if the phone is turned off. (See “Setting Power On to
Alert”on page 47.)
To stop the alarm:
ᮣ Press any key to stop the alarm. (The alarm will “snooze” and
then sound again after the selected snooze interval.)
ⅷ Press and hold the side camera/voice memo key to
cancel snoozing.
ⅷ Press (right softkey) to dismiss the alarm. Dismiss
Save
Settings
79
7500 BWA_EN_3b.qxd 06.5.29 16:59 Page 79