Sanyo scp 7500 - Manual (Page 27)

End-of-Call Options
To display the following options, press (right softkey)
within 10 seconds after disconnecting a call.
ᮣ Call Again to dial the phone number.
ᮣ Call:Speaker On to dial the phone number in speakerphone
mode.
ᮣ Save Phone# to save the phone number in your Contacts list.
Go to Phone Book appears when the number is already in your
Contacts list. (See “Saving a Phone Number” below.)
Note: The End-of-Call options are not displayed for calls identified as
No ID or Restricted.
Saving a Phone Number
Your phone can store up to seven phone numbers in each of
500 Contact entries with up to 700 total numbers. Each entry’s
name can contain 16 characters. Your phone automatically sorts
the Contacts alphabetically.
1. Enter a phone number.
2. Press (right softkey).
3. Select Save Phone#.
4. Select a label.
5. Enter a name and press .
Once you have stored an entry in the Contacts list, you are
prompted to select the following entry modes:
ᮣ New Name to enter a new name.
ᮣ From Ph. Book to select a name from the Contacts entry list.
6. Press (left softkey). Save
Options
Options
19
7500 BWA_EN_3b.qxd 06.5.29 16:59 Page 19