Changing post options – Sun Microsystems Sun Fire X4240 User Manual
Page 38
28
Sun Fire X4140, X4240, and X4440 Servers Diagnostics Guide • August 2008
Changing POST Options
These instructions are optional, but you can use them to change the operations that
the server performs during POST testing. To change POST options:
1. Initialize the BIOS Setup utility by pressing the F2 key while the system is
performing the power-on self-test (POST).
The BIOS Main menu screen is displayed.
2. Select Boot.
The Boot Settings screen is displayed.
Main Advanced PCIPnP Boot Security Chipset Exit
******************************************************************************
* Boot Settings
* Configure Settings
*
* *************************************************** * during System Boot.
*
* * Boot Settings Configuration
*
*
*
*
*
* * Boot Device Priority
*
*
* * Hard Disk Drives
*
*
* * CD/DVD Drives
*
*
*
*
*
*
*
*
*
* *
Select Screen
*
*
* **
Select Item
*
*
* Enter Go to Sub Screen *
*
* F1
General Help
*
*
* F10
Save and Exit
*
*
* ESC
Exit
*
*
*
*
*
*
*
******************************************************************************
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.