Samsung GALAXY S T959 - Manual (Page 184)

179
• Reject call with message: allows you to send a message
immediately after rejecting a call.
• Call status tones: sets a tone to play for the following status tones:
Call connect tone, Minute minder, or Call end tone. Touch each type
of status tone you want to play.
• Outgoing call vibration: allows your phone to vibrate when the
called party answers.
• Alerts on call: activates an alert tone for new messages being
received during an active call.
Configuring Voice Calls
1. Press ➔ and then tap (Settings) ➔
Call settings ➔ Voice call.
2. Tap one of the following options:
• Call forwarding: configures call forwarding options:
– Always forward: incoming calls are re-routed to a secondary number
that you specify.
– Forward when busy: forwards all your calls to voicemail when your
phone is busy.
– Forward when unanswered: automatically forwards to your
voicemail number when the phone is not answered, and otherwise
allows you to enter a voicemail number.
– Forward when unreachable: automatically forwards to your
voicemail number when the phone is not in service, or is turned off.
• Call barring: allows specified numbers to be barred from this
phone.
• Call waiting: enables call waiting functionality. When deactivated,
all incoming calls are directed to your voicemail if you are already on
an active call.
• Auto redial: automatically redial the dialed number if it is unable to
connect or the call is cut off.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1. Press ➔ and then tap (Settings) ➔
Call settings ➔ Fixed Dialing Numbers.
2. Tap Enable FDN.
3. At the prompt, enter your PIN2 code and tap OK.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code could cause the phone to lock. Contact customer
service for assistance.