Sun Microsystems X6240 - Manual (Page 44)

32 Sun Blade X6240 Server Module Installation Guide • June 2008
Before You Begin
Before you begin configuring the preinstalled Solaris 10 OS, do the following:
■ Perform initial configuration of the server’s ILOM and determine the server’s
network settings, as described in
“Connecting to the Server Module ILOM” on
page 13 .
■ Gather the information that you will need for the configuration, as listed in
“Installation Worksheet” on page 32 . Note that default values are indicated by an
asterisk (*).
Tip – To find the server module, PCI Express Module, and SP MAC addresses, see
the Customer Information Sheet included with the system box or the server, PCI EM,
and SP MAC addresses printed on their respective labels.
Installation Worksheet
Use the worksheet in TABLE 3-1 to gather the information that you need to configure
the preinstalled Solaris 10 OS. You only need to collect the information that applies
to your application of the system.