Sun Microsystems X6240 - Manual (Page 28)

16 Sun Blade X6240 Server Module Installation Guide • June 2008
5. Log in to the CLI:
a. Type the default user name, root.
b. Type the default password, changeme.
Once you have successfully logged in, the CMM ILOM displays its default
command prompt:
->
You are now connected to the CMM ILOM CLI.
6. Navigate to the server module ILOM by typing this command:
-> cd /CH/BL n/SP/cli
Where n is 0 through 9 for server modules 0 through 9 respectively.
7. Type the command start.
A prompt appears.
8. Type y to continue or n to cancel.
If you typed y, the server module ILOM prompts for its password.
Note – The CMM ILOM logs on to the server module ILOM using the user name in
the user target under /CH/BLn/SP/cli (where n is the server module number).
9. When prompted, type the password.
The default password is changeme.
The server module ILOM prompt appears. You are now connected to the server
module ILOM.
10. Type exit when you are done.
The server module ILOM exits and the CMM CLI prompt appears.