Sun Microsystems X6240 - Manual (Page 4)

iv Sun Blade X6240 Server Module Installation Guide • June 2008
Option 1: Connecting to ILOM Through the Chassis Serial Connector 14
▼ To Connect to ILOM Through the Chassis Serial Connector 14
Option 2: Connecting to ILOM Through a Dongle Cable 18
▼ To Connect to ILOM Using a Dongle Cable 19
Option 3: Connecting to ILOM Through the Ethernet Port 19
Logging In and Out of ILOM 20
▼ To Log In and Out of the ILOM CLI 20
▼ To Log In and Out of the ILOM Web GUI 20
Configuring the ILOM IP Address 23
▼ To View the ILOM IP Address 23
▼ To Configure the ILOM IP Address Using BIOS Setup Utility 23
▼ To Configure the ILOM IP Address Using DHCP 25
▼ To Configure the ILOM IP Address Using the CLI 26
Setting Up Platform Operating System and Driver Software 29
3. Configuring the Preinstalled Solaris 10 Operating System 31
Before You Begin 32
Installation Worksheet 32
Configuring the Preinstalled Solaris 10 Operating System 36
▼ To Configure the Preinstalled Solaris 10 OS 36
▼ To Redirect the Console Output to the Video Port (Optional) 38
Configuring X6240 Server Module RAID Drives 39
RAID Drive Overview 39
RAID Drive Options 40
Mirroring the Preinstalled Solaris OS with LSI RAID 40
▼ To Create a Mirror Image of the Preinstalled Solaris OS 41
Creating a RAID Set to Incorporate a Preinstalled OS Using the Sun StorageTek
REM Card 42
▼ To Incorporate a Preinstalled Solaris OS Using the Sun StorageTek REM
Card 42