Command descriptions – Siemens DataNET Hub (DNH) User Manual

Page 78

•••• Command Summary

2000585-001

Command Descriptions,

Continued

list nnn, xxx

List xxx events, starting with number nnn

list on

Continuously list events from the log buffer,
as they are added (terminate listing with Con-
trol-C)

list clear

Clear all events from log buffer

logout

Log out of hub-half

netstat dn

Display statistics for DataNET ports

password password
password

Change login password for hub-half

port start port

Start (or re-start) DataNET on a port

port stop port

Stop DataNET on a port (takes a port out of
service, e.g. for testing)

reset

Reset a hub-half

test port

Put a port into hardware test mode

test off

Turn off test mode

timeout on

Enable user login timeout

timeout off

Disable user login timeout

trace

Display current trace settings.

trace on

Enable frame tracing (start adding selected
frames to event buffer)

trace off

Disable frame tracing

trace port, port, ... port

Select ports for frame tracing

trace filter

Set filter mode for tracing

trace xxx.xxx.xxx.xxx

Set IP address filter for tracing

trace ports filter

Set trace port list and filter mode in the same
command

validation timeout

Set the link validation timeout

verbose on

Enable verbose event display

verbose off

Enable single-line summary event display