Samsung SPH-A920 - Manual (Page 142)

133 Settings
down in standby mode.
(The screen will display “Silence All.”)
To deactivate Silence All:
•
Press the volume key up repeatedly to select a desired
volume level.
Alerts
Your phone can alert you with an audible tone when you change
service areas, once a minute during a voice call, or when a call has
been connected.
The different actions available are:
•
Minute Beep - An alert tone is sounded every minute that you
are connected.
•
Service - An alert tone is sounded when you come in or out of
your coverage area.
•
Connect - An alert tone is sounded when you are initially
connected.
•
Sig. Fade Tone- An alert tone is sounded when your phone
partially loses signal due to network conditions or leaving
network coverage area.
•
Power On/Off - An alert tone is sounded when your phone is
powered On or Off.
To enable or disable alert sounds:
1. Press , followed by for Settings.
2. Press for Sound.
3. Press for Alerts.
4. Press:
•
for Minute Beep
A920 BMC Guide.book Page 133 Friday, December 9, 2005 12:20 PM