Sun Microsystems Netra CP32x0 - Manual (Page 57)

Chapter 4 Specifications and Connectors 4-3
4.2 Hardware Descriptions
4.2.1 Ethernet Management Port
The ARTM-HD provides one 10/100/1000 MBASE-T ethernet management port
with an RJ-45 connector equipped with LEDs.
4.2.2 Infinband-style Connectors
The ARTM-HD provides two (primary and secondary) Infinband-style SAS
connectors, with jack screws, for external drive support using a SFF-8470 style SAS
cable.
4.2.3 Serial Port
One asynchronous serial port with an RJ-45 serial connector is included on the
ARTM-HD I/O faceplate. The serial port may be redirected to the front blade server
when using a Netra CP3220 board, a Netra CP3260 board, or other ARTM
-compatible blade server. For more information on using both the front and rear
serial ports, refer to the appropriate blade server documentation.
4.2.4 SAS Interface
The ARTM-HD includes a LSI 1068E PCIe to 8-port SAS controller chip.
4.2.5 Module Management Controller
The onboard Module Management Controller (MMC) provides IPMI management
communication between the RTM and the blade server, and local monitoring of
temperature and voltage.